Speedway Motors 37° Degree AN Standard Tube Brake Fuel Line Flaring Tool
by admin37° Degree AN Standard Tube Brake Fuel Line Flaring Tool. 37 Degree AN Flare Tubing Standard Tube Flaring Tool. This is the tool you need to make ONLY 37° flares required for AN fittings. This tool will NOT make 45° flares for standard brake and fuel lines which are not compatible with AN hardware. This tool makes a clean, accurate 37° flare every time. Simple and easy to use. Necessary for making ONLY 37° flares for AN fittings. Will NOT make 45° flares for standard brake and fuel lines that are NOT compatible with AN hardware. Makes a clean, accurate flare every time. Works on tubing from 3/16″ to 5/8″. Not recommended for use on stainless steel. This item is replacement for. Works on 3/16″, 1/4″, 5/16″, 3/8″, 1/2″ and 5/8″ OD soft metal tubing such as aluminum, copper and mild steel. Note: If flaring stainless steel line, we strongly recommend our ratcheting flaring tool. Learn more about flaring lines for our automotive fittings by reading our tech article. However, we have had good luck using it on 3/16 steel lines. Extensive use on 3/16 lines or on larger steel lines may result in wearing out the tool quicker. We recommend using a lubricant on the. If flaring stainless steel line, we strongly recommend our ratcheting flaring tool. Not recommended for use on stainless steel tubing. Woks on aluminum, copper, or mild steel tubing sizes: 3/16″, 1/4″, 5/16″, 3/8″, 1/2″, and 5/8″ O. Not for use on stainless steel tubing. Any product you return must be in the same condition you received it and in the original packaging. We usually respond within 24 hours on weekdays.
Speedway Motors Deluxe Brake & Fuel Hard Line Flaring Tool, 37 Degree AN
by adminThe perfect tool to make 37-degree flares required for AN fittings, Standard brake and fuel lines are flared at 45-degrees which are not compatible with AN hardware, Forms stronger flares assured by a smooth, even radius formed at base of every flare with its precision machined chamfer, Slip-on yoke permits use in tight quarters, Works on 3/16″, 1/4″, 5/16″, 3/8″, 1/2″ and 5/8″ OD tubing such as aluminum, copper, brass and mild steel. Speedway Deluxe 37 Degree AN Line Flaring Tool. This is the tool you need to make the 37° flares required for AN fittings. Standard brake and fuel lines are flared at 45° which are not compatible with AN hardware. This tool forms stronger flares assured by a smooth, even radius formed at base of every flare with its precision machined chamfer. Plus, its also self gauging – just insert tube flush with top of die for accurate flare size. Hardened steel, chrome-finished cone makes exceptionally smooth, high-strength flares with a radius at base of flare – instead of the sharp angle formed by ordinary tools. Slip-on yoke permits use in tight quarters. Allows flaring where there is little space between nut and tube end. Feed screw design provides smooth, easier operation. Positive gripping and self-gauging of tube for exact flare size. Sliding die blocks lock in place by clamp action. Works on 3/16″, 1/4″, 5/16″, 3/8″, 1/2″ and 5/8″ OD tubing such as aluminum, copper, brass and mild steel. Learn more about flaring lines for our automotive fittings by reading our tech article. Made in the U. We recommend using this tool only on soft material lines. Extensive use on 3/16 or larger. Lines may result in wearing out the tool quicker. We recommend using a lubricant on the swedge. Yes i would great kit. By 34 coupe on July 18, 2021. Yes this works is great. By Billy Bob on April 01, 2021. Quality Tool made by Imperial. Yes, I recommend this product. Fittings and hose, just like mom used to make. By Jon with no H on November 05, 2020. It’s hose and fittings. They fit and look good. Just what I needed. Great product for the hobbyist. GMC on September 07, 2020. This works great on regular steel brake lines. By Staples15 on February 11, 2020. Easy to use and makes great flares in aluminum. Upgrade to the rigid tool if you plan to flare steel. Related Items / Suggested Parts. Aluminum Hard Fuel Line/Tubing, 1/4 Inch O. Aluminum Hard Fuel Line/Tubing, 3/8 Inch O. Speedway 1/2 OD Aluminum Hard Fuel Line/Tubing, 20 Foot Roll. 37 Degree Flaring Tool for Stainless Steel Line. Speedway 3/16 Inch PVF Coated Steel Brake Line, 25 Ft. Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 71 years. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. Speedway accepts full responsibility for the accuracy of our listings and product representation. This item is in the category “eBay Motors\Automotive Tools & Supplies\Hand Tools\Other Automotive Hand Tools”. The seller is “speedway_motors” and is located in this country: US. This item can be shipped to United States, New Zealand, Fiji, Papua New Guinea, Wallis and Futuna, Gambia, Malaysia, Taiwan, Poland, Oman, Suriname, United Arab Emirates, Kenya, Argentina, Guinea-Bissau, Armenia, Uzbekistan, Bhutan, Senegal, Togo, Ireland, Qatar, Burundi, Netherlands, Slovakia, Slovenia, Equatorial Guinea, Thailand, Aruba, Sweden, Iceland, Macedonia, Belgium, Israel, Kuwait, Liechtenstein, Benin, Algeria, Antigua and Barbuda, Italy, Swaziland, Tanzania, Pakistan, Burkina Faso, Panama, Singapore, Kyrgyzstan, Switzerland, Djibouti, Chile, China, Mali, Botswana, Republic of Croatia, Cambodia, Indonesia, Portugal, Malta, Tajikistan, Vietnam, Cayman Islands, Paraguay, Saint Helena, Cyprus, Seychelles, Rwanda, Bangladesh, Australia, Austria, Sri Lanka, Gabon Republic, Zimbabwe, Bulgaria, Czech Republic, Norway, Côte d’Ivoire (Ivory Coast), Kiribati, Turkmenistan, Grenada, Greece, Haiti, Greenland, Yemen, Afghanistan, Montenegro, Mongolia, Nepal, Bahamas, Bahrain, United Kingdom, Bosnia and Herzegovina, Hungary, Angola, Western Samoa, France, Mozambique, Namibia, Peru, Denmark, Guatemala, Solomon Islands, Vatican City State, Sierra Leone, Nauru, Anguilla, El Salvador, Dominican Republic, Cameroon, Guyana, Azerbaijan Republic, Macau, Georgia, Tonga, San Marino, Eritrea, Saint Kitts-Nevis, Morocco, Saint Vincent and the Grenadines, Mauritania, Belize, Philippines, Democratic Republic of the Congo, Republic of the Congo, Colombia, Spain, Estonia, Bermuda, Montserrat, Zambia, South Korea, Vanuatu, Ecuador, Albania, Ethiopia, Monaco, Niger, Laos, Ghana, Cape Verde Islands, Moldova, Madagascar, Saint Pierre and Miquelon, Lebanon, Liberia, Bolivia, Maldives, Gibraltar, Hong Kong, Central African Republic, Lesotho, Nigeria, Mauritius, Saint Lucia, Jordan, Guinea, Canada, Turks and Caicos Islands, Chad, Andorra, Romania, Costa Rica, India, Mexico, Serbia, Kazakhstan, Saudi Arabia, Japan, Lithuania, Trinidad and Tobago, Malawi, Nicaragua, Finland, Tunisia, Luxembourg, Uganda, Brazil, Turkey, Germany, Egypt, Latvia, Jamaica, South Africa, Brunei Darussalam, Honduras.
- Brand: Speedway Motors
- Manufacturer Part Number: 91089528
- Type: Hard Line Flaring Tools
Speedway Motors Deluxe Brake & Fuel Hard Line Flaring Tool, 37 Degree AN
by adminThe perfect tool to make 37-degree flares required for AN fittings, Standard brake and fuel lines are flared at 45-degrees which are not compatible with AN hardware, Forms stronger flares assured by a smooth, even radius formed at base of every flare with its precision machined chamfer, Slip-on yoke permits use in tight quarters, Works on 3/16″, 1/4″, 5/16″, 3/8″, 1/2″ and 5/8″ OD tubing such as aluminum, copper, brass and mild steel. Speedway Deluxe 37 Degree AN Line Flaring Tool. Brake System Builder’s Tip (Link). We recommend using this tool only on soft material lines. Extensive use on 3/16 or larger. Lines may result in wearing out the tool quicker. We recommend using a lubricant on the swedge. This is the tool you need to make the 37° flares required for AN fittings. Standard brake and fuel lines are flared at 45° which are not compatible with AN hardware. This tool forms stronger flares assured by a smooth, even radius formed at base of every flare with its precision machined chamfer. Plus, its also self gauging – just insert tube flush with top of die for accurate flare size. Hardened steel, chrome-finished cone makes exceptionally smooth, high-strength flares with a radius at base of flare – instead of the sharp angle formed by ordinary tools. Slip-on yoke permits use in tight quarters. Allows flaring where there is little space between nut and tube end. Feed screw design provides smooth, easier operation. Positive gripping and self-gauging of tube for exact flare size. Sliding die blocks lock in place by clamp action. Works on 3/16″, 1/4″, 5/16″, 3/8″, 1/2″ and 5/8″ OD tubing such as aluminum, copper, brass and mild steel. Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings. Made in the U. By Billy Bob on April 01, 2021. Quality Tool made by Imperial. Yes, I recommend this product. Fittings and hose, just like mom used to make. By Jon with no H on November 05, 2020. It’s hose and fittings. They fit and look good. Just what I needed. Great product for the hobbyist. GMC on September 07, 2020. This works great on regular steel brake lines. By Staples15 on February 11, 2020. Easy to use and makes great flares in aluminum. Upgrade to the rigid tool if you plan to flare steel. By Goose on March 30, 2018. Very well built- bought the cheap unit first as I had only two ends to flair. Where carp and would not hold tube. Worked great and fast. Wish they would machine the other side to do your break line flavors. That would really be awesome! Then ya get two tools in one. Related Items / Suggested Parts. Aluminum Hard Fuel Line/Tubing, 1/2 Inch O. 37 Degree Flaring Tool for Stainless Steel Line. Please take advantage of the add to cart button on each listing to get everything in your cart prior to completing checkout. Speedway Motors is Americas Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. Speedway accepts full responsibility for the accuracy of our listings and product representation. The item “Speedway Motors Deluxe Brake & Fuel Hard Line Flaring Tool, 37 Degree AN” is in sale since Monday, April 26, 2021. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Other”. The seller is “speedway_motors” and is located in Lincoln, Nebraska. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
- Brand: Speedway Motors
- Manufacturer Part Number: 91089528
- California Prop 65 Warning: True
Speedway Motors Deluxe Brake & Fuel Hard Line Flaring Tool, 37 Degree AN
by adminThe perfect tool to make 37-degree flares required for AN fittings, Standard brake and fuel lines are flared at 45-degrees which are not compatible with AN hardware, Forms stronger flares assured by a smooth, even radius formed at base of every flare with its precision machined chamfer, Slip-on yoke permits use in tight quarters, Works on 3/16″, 1/4″, 5/16″, 3/8″, 1/2″ and 5/8″ OD tubing such as aluminum, copper, brass and mild steel. Speedway Deluxe 37 Degree AN Line Flaring Tool. Brake System Builder’s Tip (Link). We recommend using this tool only on soft material lines. Extensive use on 3/16 or larger. Lines may result in wearing out the tool quicker. We recommend using a lubricant on the swedge. This is the tool you need to make the 37° flares required for AN fittings. Standard brake and fuel lines are flared at 45° which are not compatible with AN hardware. This tool forms stronger flares assured by a smooth, even radius formed at base of every flare with its precision machined chamfer. Plus, its also self gauging – just insert tube flush with top of die for accurate flare size. Hardened steel, chrome-finished cone makes exceptionally smooth, high-strength flares with a radius at base of flare – instead of the sharp angle formed by ordinary tools. Slip-on yoke permits use in tight quarters. Allows flaring where there is little space between nut and tube end. Feed screw design provides smooth, easier operation. Positive gripping and self-gauging of tube for exact flare size. Sliding die blocks lock in place by clamp action. Works on 3/16″, 1/4″, 5/16″, 3/8″, 1/2″ and 5/8″ OD tubing such as aluminum, copper, brass and mild steel. Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings. Made in the U. By Goose on March 30, 2018. Very well built- bought the cheap unit first as I had only two ends to flair. Where carp and would not hold tube. Worked great and fast. Wish they would machine the other side to do your break line flavors. That would really be awesome! Then ya get two tools in one. Only need 1 tool. By Woody on March 22, 2018. Working on new hot rod. Yes, I recommend this product. On December 28, 2017. This product is awesome. By Joe shmo on August 26, 2017. I love this product for my fuel lines I made with aluminum. Very easy simple and clean flares. The only thing I don’t like. Is the instructions state not for use with steel or stainless hard line. I have not tried any steel line because I didn’t want to damage it. By Jon on July 30, 2017. It worked on my 3/16 SS brake lines when several other (cheap) die kits failed. Don’t forget to properly ream and beburr the ends and also lube the spike. Gripped when all others just pushed the line out the bottom of die. Related Items / Suggested Parts. 37 Degree Flaring Tool for Stainless Steel Line. Please take advantage of the add to cart button on each listing to get everything in your cart prior to completing checkout. Speedway Motors is Americas Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 68 years. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. Speedway accepts full responsibility for the accuracy of our listings and product representation. The item “Speedway Motors Deluxe Brake & Fuel Hard Line Flaring Tool, 37 Degree AN” is in sale since Tuesday, July 28, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Other”. The seller is “speedway_motors” and is located in Lincoln, Nebraska. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
- Brand: Speedway Motors
- Manufacturer Part Number: 91089528
- California Prop 65 Warning: True
Speedway Motors Deluxe Brake & Fuel Hard Line Flaring Tool, 37 Degree AN
by adminThe perfect tool to make 37-degree flares required for AN fittings, Standard brake and fuel lines are flared at 45-degrees which are not compatible with AN hardware, Forms stronger flares assured by a smooth, even radius formed at base of every flare with its precision machined chamfer, Slip-on yoke permits use in tight quarters, Works on 3/16″, 1/4″, 5/16″, 3/8″, 1/2″ and 5/8″ OD tubing such as aluminum, copper, brass and mild steel. Speedway Deluxe 37 Degree AN Line Flaring Tool. Brake System Builder’s Tip (Link). We recommend using this tool only on soft material lines. Extensive use on 3/16 or larger. Lines may result in wearing out the tool quicker. We recommend using a lubricant on the swedge. This is the tool you need to make the 37° flares required for AN fittings. Standard brake and fuel lines are flared at 45° which are not compatible with AN hardware. This tool forms stronger flares assured by a smooth, even radius formed at base of every flare with its precision machined chamfer. Plus, its also self gauging – just insert tube flush with top of die for accurate flare size. Hardened steel, chrome-finished cone makes exceptionally smooth, high-strength flares with a radius at base of flare – instead of the sharp angle formed by ordinary tools. Slip-on yoke permits use in tight quarters. Allows flaring where there is little space between nut and tube end. Feed screw design provides smooth, easier operation. Positive gripping and self-gauging of tube for exact flare size. Sliding die blocks lock in place by clamp action. Works on 3/16″, 1/4″, 5/16″, 3/8″, 1/2″ and 5/8″ OD tubing such as aluminum, copper, brass and mild steel. Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings. Made in the U. By Goose on March 30, 2018. Very well built- bought the cheap unit first as I had only two ends to flair. Where carp and would not hold tube. Worked great and fast. Wish they would machine the other side to do your break line flavors. That would really be awesome! Then ya get two tools in one. Only need 1 tool. By Woody on March 22, 2018. Working on new hot rod. Yes, I recommend this product. On December 28, 2017. This product is awesome. By Joe shmo on August 26, 2017. I love this product for my fuel lines I made with aluminum. Very easy simple and clean flares. The only thing I don’t like. Is the instructions state not for use with steel or stainless hard line. I have not tried any steel line because I didn’t want to damage it. By Jon on July 30, 2017. It worked on my 3/16 SS brake lines when several other (cheap) die kits failed. Don’t forget to properly ream and beburr the ends and also lube the spike. Gripped when all others just pushed the line out the bottom of die. Related Items / Suggested Parts. 37 Degree Flaring Tool for Stainless Steel Line. Please take advantage of the add to cart button on each listing to get everything in your cart prior to completing checkout. Speedway Motors is Americas Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 68 years. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. Speedway accepts full responsibility for the accuracy of our listings and product representation. The item “Speedway Motors Deluxe Brake & Fuel Hard Line Flaring Tool, 37 Degree AN” is in sale since Sunday, March 29, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Other”. The seller is “speedway_motors” and is located in Lincoln, Nebraska. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Turks and caicos islands, Bangladesh, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Nicaragua, Peru, Pakistan, Paraguay, Viet nam, Uruguay, Russian federation.
- Brand: Speedway Motors
- Manufacturer Part Number: 91089528
- California Prop 65 Warning: True
Speedway Motors Deluxe Brake & Fuel Hard Line Flaring Tool, 37 Degree AN
by adminThe perfect tool to make 37-degree flares required for AN fittings, Standard brake and fuel lines are flared at 45-degrees which are not compatible with AN hardware, Forms stronger flares assured by a smooth, even radius formed at base of every flare with its precision machined chamfer, Slip-on yoke permits use in tight quarters, Works on 3/16″, 1/4″, 5/16″, 3/8″, 1/2″ and 5/8″ OD tubing such as aluminum, copper, brass and mild steel. Speedway Deluxe 37 Degree AN Line Flaring Tool. Brake System Builder’s Tip (Link). We recommend using this tool only on soft material lines. Extensive use on 3/16 or larger. Lines may result in wearing out the tool quicker. We recommend using a lubricant on the swedge. This is the tool you need to make the 37° flares required for AN fittings. Standard brake and fuel lines are flared at 45° which are not compatible with AN hardware. This tool forms stronger flares assured by a smooth, even radius formed at base of every flare with its precision machined chamfer. Plus, its also self gauging – just insert tube flush with top of die for accurate flare size. Hardened steel, chrome-finished cone makes exceptionally smooth, high-strength flares with a radius at base of flare – instead of the sharp angle formed by ordinary tools. Slip-on yoke permits use in tight quarters. Allows flaring where there is little space between nut and tube end. Feed screw design provides smooth, easier operation. Positive gripping and self-gauging of tube for exact flare size. Sliding die blocks lock in place by clamp action. Works on 3/16″, 1/4″, 5/16″, 3/8″, 1/2″ and 5/8″ OD tubing such as aluminum, copper, brass and mild steel. Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings. Made in the U. By Goose on March 30, 2018. Very well built- bought the cheap unit first as I had only two ends to flair. Where carp and would not hold tube. Worked great and fast. Wish they would machine the other side to do your break line flavors. That would really be awesome! Then ya get two tools in one. Only need 1 tool. By Woody on March 22, 2018. Working on new hot rod. Yes, I recommend this product. On December 28, 2017. This product is awesome. By Joe shmo on August 26, 2017. I love this product for my fuel lines I made with aluminum. Very easy simple and clean flares. The only thing I don’t like. Is the instructions state not for use with steel or stainless hard line. I have not tried any steel line because I didn’t want to damage it. By Jon on July 30, 2017. It worked on my 3/16 SS brake lines when several other (cheap) die kits failed. Don’t forget to properly ream and beburr the ends and also lube the spike. Gripped when all others just pushed the line out the bottom of die. Related Items / Suggested Parts. 37 Degree Flaring Tool for Stainless Steel Line. Please take advantage of the add to cart button on each listing to get everything in your cart prior to completing checkout. Speedway Motors is Americas Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 68 years. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. Speedway accepts full responsibility for the accuracy of our listings and product representation. The item “Speedway Motors Deluxe Brake & Fuel Hard Line Flaring Tool, 37 Degree AN” is in sale since Sunday, January 5, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Other”. The seller is “speedway_motors” and is located in Lincoln, Nebraska. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Saint lucia, Barbados, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Nicaragua, Oman, Peru, Pakistan, Paraguay, Viet nam, Uruguay, Russian federation.
- Brand: Speedway Motors
- Manufacturer Part Number: 91089528
- California Prop 65 Warning: True
- CarbType-Feed: No
Speedway Motors Deluxe Brake & Fuel Hard Line Flaring Tool, 37 Degree AN
by adminThe perfect tool to make 37-degree flares required for AN fittings, Standard brake and fuel lines are flared at 45-degrees which are not compatible with AN hardware, Forms stronger flares assured by a smooth, even radius formed at base of every flare with its precision machined chamfer, Slip-on yoke permits use in tight quarters, Works on 3/16″, 1/4″, 5/16″, 3/8″, 1/2″ and 5/8″ OD tubing such as aluminum, copper, brass and mild steel. Speedway Deluxe 37 Degree AN Line Flaring Tool. Brake System Builder’s Tip (Link). We recommend using this tool only on soft material lines. Extensive use on 3/16 or larger. Lines may result in wearing out the tool quicker. We recommend using a lubricant on the swedge. This is the tool you need to make the 37° flares required for AN fittings. Standard brake and fuel lines are flared at 45° which are not compatible with AN hardware. This tool forms stronger flares assured by a smooth, even radius formed at base of every flare with its precision machined chamfer. Plus, its also self gauging – just insert tube flush with top of die for accurate flare size. Hardened steel, chrome-finished cone makes exceptionally smooth, high-strength flares with a radius at base of flare – instead of the sharp angle formed by ordinary tools. Slip-on yoke permits use in tight quarters. Allows flaring where there is little space between nut and tube end. Feed screw design provides smooth, easier operation. Positive gripping and self-gauging of tube for exact flare size. Sliding die blocks lock in place by clamp action. Works on 3/16″, 1/4″, 5/16″, 3/8″, 1/2″ and 5/8″ OD tubing such as aluminum, copper, brass and mild steel. Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings. Made in the U. By Goose on March 30, 2018. Very well built- bought the cheap unit first as I had only two ends to flair. Where carp and would not hold tube. Worked great and fast. Wish they would machine the other side to do your break line flavors. That would really be awesome! Then ya get two tools in one. Only need 1 tool. By Woody on March 22, 2018. Working on new hot rod. Yes, I recommend this product. On December 28, 2017. This product is awesome. By Joe shmo on August 26, 2017. I love this product for my fuel lines I made with aluminum. Very easy simple and clean flares. The only thing I don’t like. Is the instructions state not for use with steel or stainless hard line. I have not tried any steel line because I didn’t want to damage it. By Jon on July 30, 2017. It worked on my 3/16 SS brake lines when several other (cheap) die kits failed. Don’t forget to properly ream and beburr the ends and also lube the spike. Gripped when all others just pushed the line out the bottom of die. Related Items / Suggested Parts. Aluminum Hard Fuel Line/Tubing, 1/2 Inch O. 37 Degree Flaring Tool for Stainless Steel Line. Please take advantage of the add to cart button on each listing to get everything in your cart prior to completing checkout. Speedway Motors is Americas Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 67 years. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. Speedway accepts full responsibility for the accuracy of our listings and product representation. The item “Speedway Motors Deluxe Brake & Fuel Hard Line Flaring Tool, 37 Degree AN” is in sale since Saturday, September 7, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Other”. The seller is “speedway_motors” and is located in Lincoln, Nebraska. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Saint lucia, Barbados, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Nicaragua, Oman, Peru, Pakistan, Paraguay, Viet nam, Uruguay, Russian federation.
- Brand: Speedway Motors
- Manufacturer Part Number: 91089528
- Aspect Ratio: N/A
Speedway Motors Deluxe Brake & Fuel Hard Line Flaring Tool, 37 Degree AN
by adminSpeedway Deluxe 37 Degree AN Line Flaring Tool. Brake System Builder’s Tip (Link). We recommend using this tool only on soft material lines. Extensive use on 3/16 or larger. Lines may result in wearing out the tool quicker. We recommend using a lubricant on the swedge. This is the tool you need to make the 37° flares required for AN fittings. Standard brake and fuel lines are flared at 45° which are not compatible with AN hardware. This tool forms stronger flares assured by a smooth, even radius formed at base of every flare with its precision machined chamfer. Plus, its also self gauging – just insert tube flush with top of die for accurate flare size. Hardened steel, chrome-finished cone makes exceptionally smooth, high-strength flares with a radius at base of flare – instead of the sharp angle formed by ordinary tools. Slip-on yoke permits use in tight quarters. Allows flaring where there is little space between nut and tube end. Feed screw design provides smooth, easier operation. Positive gripping and self-gauging of tube for exact flare size. Sliding die blocks lock in place by clamp action. Works on 3/16″, 1/4″, 5/16″, 3/8″, 1/2″ and 5/8″ OD tubing such as aluminum, copper, brass and mild steel. Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings. Made in the U. By Goose on March 30, 2018. Very well built- bought the cheap unit first as I had only two ends to flair. Where carp and would not hold tube. Worked great and fast. Wish they would machine the other side to do your break line flavors. That would really be awesome! Then ya get two tools in one. Only need 1 tool. By Woody on March 22, 2018. Working on new hot rod. Yes, I recommend this product. On December 28, 2017. This product is awesome. By Joe shmo on August 26, 2017. I love this product for my fuel lines I made with aluminum. Very easy simple and clean flares. The only thing I don’t like. Is the instructions state not for use with steel or stainless hard line. I have not tried any steel line because I didn’t want to damage it. By Jon on July 30, 2017. It worked on my 3/16 SS brake lines when several other (cheap) die kits failed. Don’t forget to properly ream and beburr the ends and also lube the spike. Gripped when all others just pushed the line out the bottom of die. Related Items / Suggested Parts. 37 Degree Flaring Tool for Stainless Steel Line. Please take advantage of the add to cart button on each listing to get everything in your cart prior to completing checkout. Speedway Motors is Americas Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 67 years. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. Speedway accepts full responsibility for the accuracy of our listings and product representation. The item “Speedway Motors Deluxe Brake & Fuel Hard Line Flaring Tool, 37 Degree AN” is in sale since Tuesday, January 8, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Other”. The seller is “speedway_motors” and is located in Lincoln, Nebraska. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Saint lucia, Barbados, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Nicaragua, Oman, Peru, Pakistan, Paraguay, Viet nam, Uruguay.
- Brand: Speedway Motors
- Manufacturer Part Number: 91089528