Brake Fuel Line

You may also like. Engine Barring Jake Brake Adjustment Tools Fuel Line Socket for Detroit Diesel. 19MM High Pressure Fuel Line Socket : For all Detroit Diesel DD13, DD15 & DD16. For DD13 DD15 DD16 MBE 4000 MBE 900 Detroit Diesel, Mercedes Benz Actros, Atego, Man 5, 6, 8-cylinder engines – D25/28. Engine Brake Adjustment Tools (4.6MM/4.1MM). W470589042300 4.6mm – 0.1811 in and W470589022300 4.1mm – 0.1614 in. DD15 & DD16 engines built before HDE0077481 &DD13 engines built before HDE0079072 use Engine Brake Adjustment tool W470589022300; (4.1 mm). DD 15 & DD16 engines built starting with HDE0077481 & DD13 engines built starting with HDE0079072 use Engine Brake Adjustment tool W470589042300. Using Engine Brake Adjustment Tools—Insert a 4.6MM / 4.1MM feeler gage between the slave pistons contact surface with the exhaust valve adjusting screw. Using Engine Barring Tool –Used to bar the engine over for service procedures, installs to engage the flywheel teeth and rotate the engine using standard square drive hand tools. Using Fuel Line Socket— Required a 3/8 Inch Drive Wobble Extension tool. Specially design for quick and easy loosening and tightening the union nut at high pressure lines of diesel engines. Replace ATCPRO2300 W470589042300 W470589022300/ /J-46392 W904589046300 /J48770 W47058090900. DD13, DD15 & DD16 ENGINE BRAKE/ JAKE BRAKE LASH ADJUSTMENT STEPS. Set the lash on all the exhaust adjusting screws first (all the adjusting screws in direct contact with the exhaust valves). Rotate the engine until a given cylinder is at maximum intake lift. When this is reached, the brake lash can be set on this cylinder. When the engine brake rocker arm is in contact with the exhaust valve, set the lash between the engine brake rocker arm adjusting screw and the actuator piston stem. DD15 & DD16 engines built before HDE0077481 use Engine Brake Adjustment tool W470589022300; set the lash to 4.1 mm 0.1614 in. DD 15 & DD16 engines built starting with HDE0077481 use Engine Brake Adjustment tool W470589042300; set the lash to 4.6 mm 0.1811 in. DD13 engines built before HDE0079072 use Engine Brake Adjustment Tool W470589022300; set the lash to 4.1 mm 0.1614 in. DD13 engines built starting with HDE0079072 use Engine Brake Adjustment tool W470589042300; set the lash to 4.6 mm 0.1811 in. Lash the engine brakes in the following firing order: 1, 5, 3, 6, 2, and 4. Torque the locknut valve adjusting screw to 50 N·m (37 lb·ft). Install the rocker cover. 1x Engine Brake Adjustment Tool(4.6mm). 1x Engine Brake Adjustment Tool4.1mm. 19MM High Pressure Fuel Line Socket. The item “Engine Barring Jake Brake Adjustment Tools Fuel Line Socket for Detroit Diesel” is in sale since Thursday, December 12, 2019. This item is in the category “eBay Motors\Automotive Tools & Supplies\Hand Tools\Other Automotive Hand Tools”. The seller is “c-store.lee” and is located in Shenzhen. This item can be shipped worldwide.

• Manufacturer Part Number: Does not apply
• Country/Region of Manufacture: China
• Brand: Unbranded/Generic
• Type: Allen Key
• Warranty: 2 Year

Categories: engine | Comments Off